Symbol Technologies AP-5131 - Manual (Page 399)

Command Line Interface Reference 8-105
AP5131>admin(network.wireless.qos.edit)>
Descripton:
Edits the properties of an existing QoS policy.
Syntax:
For information on configuring the WLAN QoS options available to the AP-5131 using the applet (GUI), see
Setting the WLAN Quality of Service (QoS) Policy on page 5-34 .
show Displays QoS policy parameters.
set qos-name Sets the QoS name for the specified index entry.
vop Enables or disables support (by index) for legacy VOIP devices.
mcast Defines primary and secondary Multicast MAC address.
wmm-qos Enables or disables the QoS policy index specified.
param-set Defines the data type used with the qos policy and mesh
network. When set to a value other then manual, editing the
access category values is not necessary. Options include; 11g-
default, 11b-default, 11g-wifi, 11b-wifi, 11g-voice, 11b-voice or
manual for advanced users).
cwmin category> Defines Minimum Contention Window (CW-Min) for specified
access categoiry and index.
cwmax category> Defines Maximum Contention Window (CW-Max) for specified
access categoiry and index.
aifsn category> Sets Arbitrary Inter-Frame Space Number (AIFSN) for specified
access categoiry and index.
txops category> Configures Opportunity to Transmit Time (TXOPs Time) for
specified access categoiry and index.
default Defines CWMIN, CWMAX, AIFSN and TXOPs default values.
change Completes the policy edit and exits the session.
.. Cancels the changes and exits.