2 accessing the cli via telnet, Accessing the cli via telnet -2 – Symbol Technologies AP-5131 User Manual
Page 296
AP-5131 Access Point Product Reference Guide
8-2
8.1.2 Accessing the CLI via Telnet
To connect to the AP-5131 CLI through a Telnet connection:
1.
Telnet into the AP-5131 using an IP address of 192.168.0.1
2.
Enter the default username of
admin
and the default password of
symbol
. If this is your first time logging into the AP-5131,
you are unable to access any of the AP-5131’s commands until the country code is set. A new password will also need to be
created.