Symbol Technologies AP-5131 - Manual (Page 462)

AP-5131 Access Point Product Reference Guide 8-168
AP5131>admin(system.ntp)> set
Description:
Sets NTP parameters for AP-5131 clock synchronization.
Syntax:
Example:
admin(system.ntp)> set mode enable
admin(system.ntp)> set server 1 203.21.37.18
admin(system.ntp)> set port 1 123
admin(system.ntp)> set intrvl 15
admin(system.ntp)> set zone 1
For information on configuring NTP using the applet (GUI), see Configuring Network Time Protocol (NTP) on page 4-32 .
set mode Enables or disables NTP.
server Sets the NTP sever IP address.
port Defines the port number.
intrvl Defines the clock synchronization interval used between the AP-5131 and the
NTP server in minutes (15 - 65535).
time Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the
month, [hh] - hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of the
zone.
zone Defines the time zone (by index) for the target country.