Symbol Technologies AP-5131 - Manual (Page 339)

Command Line Interface Reference 8-45
AP5131>admin(network.wan.nat)> add
Description:
Adds NAT entries.
Syntax:
Example:
admin(network.wan.nat)> add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)> list 1
-----------------------------------------------------------------------------
index name prot start port end port internal ip translation port
-----------------------------------------------------------------------------
1 indoor udp 20 29 10.10.2.2 0
Related Commands:
For an overview of the AP-5131 NAT options available using the applet (GUI), see
Configuring Network Address Translation (NAT) Settings on page 5-19 .
add
Sets an inbound network address translation (NAT) for WAN address , where is the name of the entry
(1 to 7 characters), is the transport protocol (one of
tcp , udp , icmp , ah , esp , gre , or all ), is the starting
port number in a port range, is the ending port number in a port range, is the internal IP address, and
is the (optional) internal translation port.
delete Deletes one of the inbound NAT entries from the list.
list Displays the list of inbound NAT entries.