Symbol Technologies AP-5131 User Manual

Page 166

AP-5131 Access Point Product Reference Guide

5-42

Click the

White List Entries

button (within the

WhiteList Configuration

field) to create

a set of allowed destination IP addresses. These allowed destination IP addresses are called
a White List. Ten configurable IP addresses are allowed for each WLAN. For more
information, see

Defining the Hotspot White List on page 5-43

Refer to the

Radius Accounting

field to enable Radius accounting and specify the a

timeout and retry value for the Radius server.

Refer to the

Radius Configuration

field to define a primary and secondary Radius server

port and shared secret password.

Welcome Page URL

Define the complete URL for the location of the Welcome page. The
Welcome page asserts the hotspot user has logged in successfully
and can access the Internet.

Fail Page URL

Define the complete URL for the location of the Fail page. The Fail
screen asserts the hotspot authentication attempt failed, you are
not allowed to access the Internet and you need to provide correct
login information to access the Internet.

Enable Accounting

Select the

Enable Accounting

checkbox to enable a Radius

Accounting Server used for Radius authentication for a target
hotspot user.

Server Address

Specify an IP address for the external Radius Accounting server
used to provide Radius accounting for the hotspot. If using this
option, an internal Radius server cannot be used. The IP address of
the internal Radius server is fixed at 127.0.0.1 and cannot be used
for the external Radius server.

Radius Port

Specify the port on which the Radius accounting server is listening.

Shared Secret

Specify a shared secret for accounting authentication for the
hotspot. The shared secret is required to match the shared secret
on the external Radius accounting server.

Timeout

Set the timeout value in seconds (1-255) used to timeout users
accessing the Radius Accounting server if they have not
successfully accessed the Accounting Server.

Retries

Define the number of retries (1-10) the user is allowed to access
the Radius Accounting Server if the first attempt fails. The default
is 1.