Displaying bridge extension capabilities, Displaying bridge extension capabilities -27 – SMC Networks TigerSwitch 100 User Manual
Page 57
D
ISPLAYING
B
RIDGE
E
XTENSION
C
APABILITIES
2-27
CLI – If you copy the running configuration to a file, you can set this file
as the startup file at a later time, and then restart the switch.
Displaying Bridge Extension Capabilities
The Bridge MIB includes extensions for managed devices that support
Multicast Filtering, Traffic Classes, and Virtual LANs. You can access these
extensions to display default settings for the key variables, or to configure
the global setting for GARP VLAN Registration Protocol (GVRP).
Command Attributes
•
Extended Multicast Filtering Services – This switch does not
support the filtering of individual multicast addresses based on GMRP
(GARP Multicast Registration Protocol).
•
Traffic Classes – This switch provides mapping of user priorities to
multiple traffic classes. (Refer to “Class of Service Configuration” on
page 2-77.)
Console#copy running-config file
destination file name : 051902.cfg
/
Console#
Console#config
Console(config)#boot system config: 051902.cfg
Console(config)#exit
Console#reload