SMC Networks TigerSwitch 100 - Manual (Page 185)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-41
Default Setting
None
Command Mode
Global Configuration
Command Usage
• By using this command more than once you can build up a list of host
IP addresses.
• The maximum number of host IP addresses allowed is five.
Example
logging facility
Use this command to set the facility type for remote logging of syslog
messages. Use the no form to return the type to the default.
Syntax
logging facility type
no logging facility type
type - A number that indicates the facility used by the syslog server
to dispatch log messages to an appropriate service. (Range: 16-23)
Default Setting
23
Command Mode
Global Configuration
Example
Console(config)#logging host 10.1.0.3
Console(config)#
Console(config)#logging facility 19
Console(config)#