SMC Networks TigerSwitch 100 - Manual (Page 218)

C
OMMAND
L
INE
I
NTERFACE
3-74
line
Use this command to identify a specific line for configuration, and to
process subsequent line configuration commands.
Syntax
line {console | vty}
• console - Console terminal line.
• vty - Virtual terminal for remote console access.
Default Setting
There is no default line.
Command Mode
Global Configuration
Command Usage
Telnet is considered a virtual terminal connection and will be shown as
“Vty” in screen displays such as show users. However, the serial
communication parameters (e.g., databits) do not affect Telnet
connections.
silent-time Sets the amount of time the management
console is inaccessible after the number of
unsuccessful logon attempts exceeds the
threshold set by the password-thresh
command LC 3-79
databits Sets the number of data bits per character that
are interpreted and generated by hardware LC 3-80
parity Defines the generation of a parity bit LC 3-81
speed Sets the terminal baud rate LC 3-82
stopbits Sets the number of the stop bits transmitted
per byte LC 3-83
show line Displays a terminal line's parameters NE,
PE 3-83
Command Function Mode Page