SMC Networks TigerSwitch 100 - Manual (Page 182)

C
OMMAND
L
INE
I
NTERFACE
3-38
Example
Related Commands
ip ssh (3-34)
logging on
Use this command to control logging of error messages. This command
sends debug or error messages to a logging process. The no form disables
the logging process.
Syntax
logging on
no logging on
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to switch memory
or sent to remote syslog servers. You can use the logging history
command to control the type of error messages that are stored in
memory. The logging trap command controls the type of error
messages that are sent to specified syslog servers.
Example
Console#show ip ssh
Information of secure shell
SSH status: enable
SSH authentication timeout: 120
SSH authentication retries: 3
Console#
Console(config)#logging on
Console(config)#