SMC Networks TigerSwitch 100 - Manual (Page 169)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-25
System Management Commands
These commands are used to control system logs, passwords, user name,
browser configuration options, and display or configure a variety of other
system information.
Command Function Mode Page
Device Description Command
hostname
Specifies or modifies the host name for the
device GC 3-27
User Access Commands
username
Sets user name authentication at login GC 3-27
enable password Sets a password to control access to various
privilege levels GC 3-29
Jumbo Frame Command
jumbo frame
Allows jumbo frames to pass through the
switch GC 3-30
Web Server Commands
ip http port
Specifies the port to be used by the Web
browser interface GC 3-31
ip http server Allows the switch to be monitored or
configured from a browser GC 3-31
ip http
secure-server Enables the HTTPS server on the switch GC 3-32
ip http secure-port Specifies the UDP port number used for
HTTPS connection to the switch’s Web
interface
GC 3-33
Secure Shell Commands
ip ssh server
Enables the SSH server on the switch GC 3-35
ip ssh Specifies the authentication timeout for the
SSH server and the number of retries allowed
by a client GC 3-34
disconnect ssh Terminates an SSH connection PE 3-36