SMC Networks TigerSwitch 100 - Manual (Page 184)

C
OMMAND
L
INE
I
NTERFACE
3-40
* There are only Level 2, 5 and 6 error messages for the current firmware
release.
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for Flash memory must be a higher priority
(i.e., numerically lower) than that specified for RAM.
Example
logging host
Use this command to add a syslog server host IP address that will receive
logging messages. Use the no form to remove a syslog server host.
Syntax
logging host host_ip_address
no logging host host_ip_address
host_ip_address - The IP address of a syslog server.
notifications 5 Normal but significant
condition, such as cold
start LOG_NOTICE
informational 6 Informational messages
only LOG_INFO
debugging 7 Debugging messages LOG_DEBUG
Console(config)#logging history ram 0
Console(config)#
Level Argument Level Description Syslog Definition