SMC Networks TigerSwitch 100 - Manual (Page 167)

F
LASH
/F
ILE
C
OMMANDS
3-23
Example
The following example shows how to display all file information:
whichboot
Use this command to display which files booted.
Default Setting
None
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot
command. See the table on the previous page for a description of the file
information displayed by this command.
Console#dir
file name file type startup size (byte)
-------------------------------- -------------- ------- -----------
diag_0060 Boot-Rom image Y 111360
run_01642 Operation Code N 1074304
run_0200 Operation Code Y 1083008
Factory_Default_Config.cfg Config File N 2574
startup Config File Y 2710
-------------------------------------------------------------------
Total free space: 0
Console#
Console#whichboot
file name file type startup size (byte)
----------------- -------------- ------- -----------
diag_0060 Boot-Rom image Y 111360
run_0200 Operation Code Y 1083008
startup Config File Y 2710
Console#