SMC Networks TigerSwitch 100 - Manual (Page 108)

C
ONFIGURING THE
S
WITCH
2-78
• If the output port is an untagged member of the associated VLAN,
these frames are stripped of all VLAN tags prior to transmission.
Command Attributes
• Default Priority – The priority that is assigned to untagged frames
received on the specified port. (Range: 0 - 7, Default: 0)
• Number of Egress Traffic Classes – The number of queue buffers
provided for each port.
Web – Click Priority, Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click Apply.
CLI – This example assigns a default priority or 5 to port 3.
Mapping CoS Values to Egress Queues
This switch processes Class of Service (CoS) priority tagged traffic by
using four priority queues for each port, with service schedules based on
Console(config)#interface ethernet 1/3 3-85
Console(config-if)#switchport priority default 5 3-151