SMC Networks TigerSwitch 100 - Manual (Page 103)

VLAN C
ONFIGURATION
2-73
Web – Open VLAN, VLAN Static Membership. Select an interface from
the scroll-down box (Port or Trunk). Click Query to display VLAN
membership information for the interface. Select a VLAN ID, and then
click Add to add the interface as a tagged member, or click Remove to
remove the interface. After configuring VLAN membership for each
interface, click Apply.
CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes
Port 3 from VLAN 2.
Configuring VLAN Behavior for Interfaces
You can configure VLAN behavior for specific interfaces, including the
default VLAN identifier (PVID), accepted frame types, ingress filtering,
GVRP status, and GARP timers.
Console(config)#interface ethernet 1/3 3-85
Console(config-if)#switchport allowed vlan add 1 tagged 3-129
Console(config-if)#switchport allowed vlan remove 2