SMC Networks TigerSwitch 100 - Manual (Page 220)

C
OMMAND
L
INE
I
NTERFACE
3-76
Exec (NE) mode.
- login local selects authentication via the user name and password
specified by the username command (i.e., default setting). When
using this method, the management interface starts in Normal
Exec (NE) or Privileged Exec (PE) mode, depending on the user’s
privilege level (0 or 15 respectively).
- no login selects no authentication. When using this method, the
management interface starts in Normal Exec (NE) mode.
• This command controls login authentication via the switch itself. To
configure user names and passwords for remote authentication
servers, you must use the RADIUS software installed on those servers.
Example
Related Commands
username (3-27)
password (3-76)
password
Use this command to specify the password for a line. Use the no form to
remove the password.
Syntax
password {0 | 7} password
no password
- {0 | 7} - 0 means plain password, 7 means encrypted password
- password - Character string that specifies the line password.
(Maximum length: 8 characters plain text, 32 encrypted, case
sensitive).
Default Setting
No password is specified.
Console(config-line)#login local
Console(config-line)#