beautypg.com

Exec-timeout, Exec-timeout -77 – SMC Networks TigerSwitch 100 User Manual

Page 221

background image

L

INE

C

OMMANDS

3-77

Command Mode

Line Configuration

Command Usage

• When a connection is started on a line with password protection, the

system prompts for the password. If you enter the correct password,
the system shows a prompt. You can use the password-thresh
command to set the number of times a user can enter an incorrect
password before the system terminates the line connection and returns
the terminal to the idle state.

• The encrypted password is required for compatiblity with legacy

password settings (i.e., plain text or encrypted) when reading the
configuration file during system bootup or when downloading the
configuration file from a TFTP server. There is no need for you to
manually configure encrypted passwords.

Example

Related Commands

login (3-75)
password-thresh (3-78)

exec-timeout

Use this command to set the interval that the system waits until user input
is detected. Use the no form to remove the timeout definition.

Syntax

exec-timeout seconds
no exec-timeout

seconds - Integer that specifies the number of seconds.
(Range: 0 - 65535 seconds; 0: no timeout)

Console(config-line)#password 0 secret
Console(config-line)#