SMC Networks TigerSwitch 100 - Manual (Page 249)

S
PANNING
T
REE
C
OMMANDS
3-105
Spanning Tree Commands
This section includes commands that configure the Spanning Tree
Protocol (STP) for the overall switch, and commands that configure STP
for the selected interface.
Command Function
Mode Page
spanning-tree Enables the spanning tree protocol GC 3-106
spanning-tree
mode Configures STP or RSTP mode GC 3-107
spanning-tree
forward-time Configures the spanning tree bridge forward
time GC 3-108
spanning-tree
hello-time Configures the spanning tree bridge hello
time GC 3-109
spanning-tree
max-age Configures the spanning tree bridge
maximum age GC 3-109
spanning-tree
priority Configures the spanning tree bridge priority GC 3-110
spanning-tree
path-cost method Configures the path cost method for RSTP GC 3-111
spanning-tree
transmission-limit Configures the transmission limit for RSTP GC 3-112
spanning-tree cost Configures the spanning tree path cost of an
interface
IC 3-113
spanning-tree port
priority Configures the spanning tree priority of an
interface IC 3-114
spanning-tree
portfast Sets an interface to fast forwarding IC 3-115
spanning-tree
edge-port Enables fast forwarding for edge ports IC 3-116
spanning-tree
protocol-migration Re-checks the appropriate BPDU format PE 3-117
spanning-tree
link-type Configures the link type for RSTP IC 3-118
show spanning-tree Shows the Spanning Tree configuration PE 3-119