SMC Networks TigerSwitch 100 - Manual (Page 53)

M
ANAGING
F
IRMWARE
2-23
• Destination File Name — File names are case-sensitive. The file
name should not contain slashes (\ or /), the leading letter of the file
name should not be a period (.), and the maximum length for file
names on the TFTP server is 127 characters or 31 characters for files
on the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
Note: The maximum number of runtime code files is 2.
Downloading System Software from a Server
When downloading runtime code, you can specify the Destination File
Name to replace the current image, or first download the file using a
different name from the current runtime code file, and then set the new
file as the startup file.
Web – Click System, Firmware. Enter the IP address of the TFTP server,
enter the file name of the software to download, select a file on the switch
to overwrite or specify a new file name, then click “Transfer from Server.”
When you download a file using a different name from the current runtime
code file, you need to select the new file name from the drop-down box
for the operation code used at startup, and then click Apply Changes.