SMC Networks TigerSwitch 100 - Manual (Page 266)

C
OMMAND
L
INE
I
NTERFACE
3-122
vlan database
Use this command to enter VLAN database mode. All commands in this
mode will take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Use the VLAN database command mode to add, change, and delete
VLANs. After finishing configuration changes, you can display the
VLAN settings by entering the show vlan command.
• Use the interface vlan command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these
commands are written to the running-configuration file, and you can
display this file by entering the show running-config command.
Example
Related Commands
show vlan (3-131)
Display VLAN Information
show vlan
Shows VLAN information NE,
PE 3-131
show interfaces status
vlan Displays status for the specified VLAN
interface NE,
PE 3-95
show interfaces
switchport Displays the administrative and
operational status of an interface NE,
PE 3-98
Console(config)#vlan database
Console(config-vlan)#
Command Function Mode Page