Sun Microsystems Virtual Tape Library - Manual (Page 92)

Managing virtual libraries
78 VTL User Guide • May 2008 G • 96267
3. Select the Auto Save Config tab ( C below).
4. Check Enable Auto Save Configuration File check box ( D above).
5. In the field provided, enter the Ftp Server Name for the machine that will host
the backup configuration files ( E above).
The target server must have FTP server installed and enabled.
6. Enter the relative path to the Target Directory in the field provided ( F above).
The specified path should be relative to the root directory of the ftp server. Do not
use an absolute path.
7. Enter host log on information for the remote server in the fields provided
( G above).
The specified user must be an ftp user on the remote host and must have read/write
access to the specified target directory.
8. Specify a replication Interval using the list controls provided ( H above).
9. Specify the Number of Copies that should be retained using the spinner
provided ( J above).
10. Click OK ( K above).
C
D
E
F
G
H
J
K