Sun Microsystems Virtual Tape Library - Manual (Page 81)

Managing virtual libraries
96267 • G Chapter 4 VTL operations 67
3. When the Set Client Fibre Channel Properties property sheet appears,
select the World Wide Port Name (WWPN) of the initiator by checking the
corresponding check box (
E below), or press the Add button ( F ), enter a new
Initiator WWPN , and press OK ( G ). Then press Next ( H ).
4. When the Fibre Channel Option panel appears, check the check boxes for any
optional support that the client requires ( J below). Then press Next ( K ).
E
G
F
H
J
K