Sun Microsystems Virtual Tape Library - Manual (Page 213)

Import/Export
96267 • G Appendix A VTL command line reference 199
[-j ] [-T -S ] [-X ]
iscon getimportexportjobstatus --server-name=
[--server-username= --server-password=]
[--job-id-list=] | [--job-type= --
job_status=]
[--rpc-timeout=]
Description:
This command displays the status of the import/export jobs present in the queue. If
no filters are specified, the command displays all the jobs that are in the queue.
‐j <‐‐job‐id‐list> is an optional list of job IDs separated with commas. The command
displays the status of specified jobs only. All other filters are ignored.
‐T <‐‐job‐type> is an optional job type based filter. The command displays those jobs
matching the provided type. The accepted job type values are: IMPORT, EXPORT, or
OTHER.
‐S <‐‐job_status> is an optional job status based filter. The command displays those
jobs matching the provided status. The accepted job status values are: FAILED,
HOLD, READY, or OTHER.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
Resume import/export jobs
iscon resumeimportexportjobs -s [-u -p ]
-j [-X ]
iscon resumeimportexportjobs --server-name=
[--server-username= --server-password=] --job-id-
list=
[--rpc-timeout=]
Description:
This command resumes specified import/export jobs. The jobs must be held in the
import/export queue in a suspended state.
‐j <‐‐job‐id‐list> is a list of job IDs separated with commas.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.