Sun Microsystems Virtual Tape Library - Manual (Page 289)

96267 • G 275
APPENDIX
E E E
ILOM command reference
The following table summarizes Integrated Lights Out Manager (ILOM) commands
you can use to manage the service processor. For more information on ILOM
commands, see the ILOM Administration Guide.
Description Command
User Commands
Add a local user. create /SP/users/user1 password=password
role=administrator|operator
Delete a local user. delete /SP/users/user1
Change a local user’s properties. set /SP/users/user1 role=operator
Display information about all local users. show -display [targets|properties|all]
-level [value|all] /SP/users
Display information about LDAP settings. show /SP/clients/ldap
Change LDAP settings. set /SP/clients/ldap binddn=proxyuser
bindpw=proxyuserpassword
defaultrole=administrator|operator
ipaddress=ipaddress
Network and Serial Port Setting Commands
Display network configuration information. show /SP/network
Change network properties for the ILOM.
Changing certain network properties, like the IP
address, disconnects your active session. set /SP/network pendingipaddress=ipaddress
pendingipdiscovery=dchp|static
pendingipgateway=ipgateway
pendingipnetmask=ipnetmask commitpending=true
Display information about the external serial
port. show /SP/serial/external
Change the external serial port configuration. set /SP/serial/external pendingspeed=integer
commitpending=true
Display information about the serial connection
to the host. show /SP/serial/host