Sun Microsystems Virtual Tape Library - Manual (Page 257)

96267 • G 243
APPENDIX
D
SNMP traps
The VTL product family defines the following Simple Network Management
Protocol (SNMP) traps.
Trap Severity Message
9 Error SCSI Port Error -- %1.
1000 Error Socket connection could not be terminated properly -- %1.
1001 Error Socket connection could not be terminated properly due to error during
shutdown -- %1.
1002 Error Unexpected interrupt occurred.
1003 Informational "VTL Server has detected virtual device[%1] at SCSI %2, channel %3, ID %4, LUN
%5."
1004 Informational VTL Server has not detected any virtual device.
1005 Error Out of kernel resources. Failed to get major number for VTL SCSI device.
1006 Error Failed to allocate memory.
1007 Error Failed to set up the network connection due to an error in SANRPC_Init -- %1.
1008 Error Failed to set up the network connection due to an error in SANRPCListen -- %1.
1009 Informational There are %1 real device(s) associated with virtual device [%2].
1010 Informational Real Device[%1 %2 %3 %4].
1011 Error Error while writing -- write(%1) result = 0x%2 cmd = 0x%3.
1012 Error Error while reading -- read(%1) result = 0x%2 cmd = 0x%3.
1013 Informational VTL Server [Build %1] is running on Linux %2.
1014 Informational VTL Server has been shut down.
1015 Informational "Maximum SCSI devices reached. On your VTL Server, verify with the command:
cat /proc/scsi/scsi"
1016 Informational Primary virtual device %1 has failed. VTL is switching to the secondary
virtual device.
1017 Informational Secondary virtual device %1 has failed.