Sun Microsystems Virtual Tape Library - Manual (Page 50)

Managing virtual libraries
36 VTL User Guide • May 2008 G • 96267
5. When the Select Physical Devices panel appears, use the check boxes
and/or the selection buttons ( F below) to select the libraries or devices that you
want to assign to the VTL system. Press Next ( G ).
If you are configuring an IBM iSeries/AS400 solution, assign IBM Magstar 3590E11,
3592, or Ultrium LTO1, LTO2, or LTO3 physical drives to the virtual tape library for
use in import and export operations.
6. When the Prepare Device panel appears, press Finish.
Next task: “Assigning direct‐attached physical tape libraries/devices” on page 37.
B
A