Sun Microsystems Virtual Tape Library - Manual (Page 83)

Managing virtual libraries
96267 • G Chapter 4 VTL operations 69
▼ Assigning virtual libraries to storage clients
1. When the Assign a Virtual Tape Library Wizard appears, check the
Assign the tape library and all drives... check box ( A below), select
a client ( B ), and press Next ( C ).
As a general rule, assign one library per client.
2. When the Select a Fibre Channel Target panel appears, select the Target
WWPN that you will zone to the client from the list ( D below), and press Next ( E ).
To insure that the four target ports on the VTL appliance are fully and equally
utilized, assign a minimum of four virtual tape drives per client.
C
B
A
client_x
client_y
client_z
virtual_library_name
D
E
virtual_library_name