Sun Microsystems Virtual Tape Library - Manual (Page 189)

Virtual devices / Clients
96267 • G Appendix A VTL command line reference 175
This command allows you to delete a client from the specified server. ‐c (‐‐client‐
name) is the name of the client to be deleted.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
Get client properties
iscon getclientprop -s [-u -p ]
-c [-X ]
iscon getclientprop --server-name=
[--server-username= --server-password=]
--client-name= [--rpc-timeout=]
Description:
This command gets client properties. ‐c (‐‐client‐name) is required to specify the
client name.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
Assign virtual device
iscon assignvdev -s [-u -p ]
-v -c -a [-y]
[-I ] [-T ] [-l ] [-X ]
iscon assignvdev --server-name=
[--server-username= --server-password=] --vdevid=
--client-name= --access-mode= [--vlib-only]
[--initiatorWWPN=] [--targetWWPN=] [--
lun=]
[--rpc-timeout=]
Description:
This command allows you to assign a virtual device on a specified server to a client.
‐v (‐‐vdevid) is required to specify the virtual device ID of the virtual tape library or
virtual tape drive to be assigned.
‐c (‐‐client‐name) is required to specify the client to which the virtual tape library or
drive will be assigned.