Sun Microsystems Virtual Tape Library - Manual (Page 208)

System configuration
194 VTL User Guide • May 2008 G • 96267
‐I (‐‐scsiaddress) is the option to specify which physical devices should be used to
create the virtual device. It can be a list of ACSLs separated with commas or a file
enclosed in <> containing an ACSL on each line.
ACSL=#:#:#:# (adapter:channel:id:lun)
‐n (‐‐vdevname) is an option to specify the virtual tape name or prefix when creating
more than one tape. The maximum length of the virtual device name is 64. Leading
and trailing spaces will be removed. Enclose the name in double quotes to ensure it
is properly parsed and interpreted. The following characters are invalid for the
name: <>ʺ&$/\ʹ
‐g (‐‐size‐gb) is an option to specify the size in GB. The size of the virtual tape will be
the size configured in the properties of the virtual tape library or virtual tape drive if
it is not specified. This option cannot be specified if the capacity‐on‐demand option
is not enabled at library level.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 seconds for
the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.
System configuration
Add a license keycode
iscon addlicense -s [-u -p ] -k keycode>
[-X ]
iscon addlicense --server-name=
[--server-username= --server-password=] --
license=
[--rpc-timeout=]
Description:
This command adds a license keycode.
‐X (‐‐rpc‐timeout) is an option to specify a number between 1 and 30000 in seconds
for the RPC timeout. The system will retry the command for the amount of time
specified if the server does not respond. The default RPC timeout is 30 seconds.