Sun Microsystems Virtual Tape Library User Manual

Page 87

Managing virtual libraries

96267 • G

Chapter 4 VTL operations

10. When prompted, confirm your entries by entering y (yes).

The script builds the driver instances for the specified libraries:

11. Load the driver:

12. Change to the ACSSS home directory, and start ACSLS:

13. Change to the acsss user account:

Next task: “Adding virtual libraries to the ACSLS configuration” on page 73.

▼

Adding virtual libraries to the ACSLS configuration

Once you have created driver instances for the VTL virtual libraries, add the libraries
to the ACSLS host configuration using the following procedure.

1. Start the config acs new utility:

Is this correct? (y or n): y

Building an mchanger instance for each library...

Successfully built the following...

/dev/mchanger0: STK L700 678-cells 10-drives

/dev/mchanger1: STK L700 678-cells 10-drives

/dev/mchanger2: STK L700 678-cells 10-drives

[ACSLS_server]root:# ./add_drv mchanger

[ACSLS_server]root:# cd ../

[ACSLS_server]root:# ./rc.acsss

Use is subject to license terms.

NOW IN SU - ACSSS.

Use is subject to license terms.

[ACSLS_server]root:#

[ACSLS_server]root:# su - acsss

[ACSLS_server]acsss:$

[ACSLS_server]acsss:$ config acs new

2008-03-20 10:28:07

Enter the new ACS Configuration details