Sun Microsystems Sun Fire X4150 - Manual (Page 59)

Chapter 4 Configuring, Managing and Maintaining the Server Using the Web-Based Interface 43
▼ To View the State of the Fault LEDs
1. In the main menu, click the System Monitoring tab.
The System Monitoring submenu tabs appear.
2. Click the Fault LED submenu tab.
The Fault LED Control screen appears (see FIGURE 4-4 ).
FIGURE 4-4 The Fault LED Screen
The Fault LED screen is divided into three sections, the Fault LED Control
section, the Front Panel Fault LED Control, and the On-Board Fault LED Control.
These sections allow you to monitor and change the status of each LED. If the
current status of an LED is On, then you will have the option to turn it Off.
Otherwise, the LED status is shown as Off. For example in
FIGURE 4-4 , the front
panel Fault LED, the Overtemperature Warning LED and the internal on-board
CPU LED and DIMM LED are On.
▼ To Turn the Fault LEDs Off
1. Select the appropriate radio button for the fault LED that you would like to
turn off.
2. Click the appropriate Submit button for the particular section to turn the LED
off.