Sun Microsystems Sun Fire X4150 - Manual (Page 121)

Appendix A Command-Line Interface Reference 105
Options
[-h|help]
Targets and Properties
Examples
->show /SP/network (This is the only valid command as it displays all
parameters)
/SP/network
start
Use the start command to turn on the target or to initiate a connection to the host
console.
Syntax
start [options] target
Options
[-h|help]
Targets
Targets:
Target Commands:
show
set
TABLE A-11 start Command Target
Valid Target Description
/SP/AgentInfo/Console Starts an interactive session to the console stream.