Sun Microsystems Sun Fire X4150 - Manual (Page 112)

96 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
TABLE A-2 General Commands
Description Command
Log out of the CLI. exit
Display the version of the ELOM firmware
running on the SP. version
Display information about commands and targets. help
Display information about a specific command. help show
TABLE A-3 User Commands
Description Command
Add a local user. create /SP/users/ user1
Set or change password. set /SP/users/ username Password=password
Set or change permission. set /SP/users/ username Permission=
[operator|administrator|user|callback]
Delete a local user named user1. delete /SP/users/user1
Change the permission level of a
local user named user1. set /SP/users/user1 Permission=operator
TABLE A-4 Network and Serial Port Setting Commands
Description Command
Display network configuration information. show /SP/network
Change network properties for the ELOM.
Changing certain network properties, like
the IP address, will disconnect your active
session. set /SP/network
IPAddress =xxx.xxx.xxx.xxx
NetMask= xxx.xxx.xxx.xxx
Gateway= xxx.xxx.xxx.xxx
Set DHCP or change to static settings. set /SP/network IPSource=
[dhcp|static]