Sun Microsystems Sun Fire X4150 - Manual (Page 54)

38 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
▼ To Configure Active Directory Service
1. From the User Management submenu, click the ADS Configuration tab.
The ADS Configuration screen appears.
2. Enter the Primary, Secondary DNS and the Root Domain addresses.
3. If one is available, upload your certificate.
4. Click Submit, or click Reset to clear your changes.
Managing and Maintaining the System
The User Management, System Monitoring, Remote Control, Maintenance, and
System Information submenus enable you to manage and maintain server-related
functions. These functions are described in the following sections:
■ “Managing Users and Accounts” on page 38
■ “Managing the System Locator Indicator LED” on page 42
■ “Setting Power Control” on page 44
■ “Resetting the Service Processor” on page 44
■ “Updating the Firmware” on page 45
■ “Recovering from a Corrupt SP” on page 46
■ “Managing Session Timeout” on page 48
■ “Setting the Time” on page 49
Managing Users and Accounts
The User Management tab provides access to the User Account screen, which lists
current users by privilege and status, and enables the administrator to add, delete,
modify and enable/disable user accounts.
The ELOM supports up-to 10 user accounts. One of the user accounts is root, which
is set by default and cannot be removed. Therefore, you can configure 9 additional
accounts. Each user account consists of a user name, a password, and a permission.
Note – User permissions extend to both the web-based interface and the serial
connection methods.