Sun Microsystems Sun Fire X4150 - Manual (Page 113)

Appendix A Command-Line Interface Reference 97
TABLE A-5 Alert Commands
Description Command
Display information about
PET alerts Destination1. show /SP/AgentInfo/PET/Destination1
Change alert configuration. set /SP/AgentInfo/PET/Destination[n] IPAddress=
ipaddress
TABLE A-6 SNMP Commands
Description Command
Display information
about SNMP settings.
By default, the SNMP
port is 161, and v3 is
enabled. show /SP/AgentInfo/SNMP port= snmpportnumber set=
enabled|disabled
version1 =enabled|disabled
version2c= enabled|disabled
version3 =enabled|disabled
Display SNMP users. show /SP/AgentInfo/SNMP/user
Add an SNMP user. create /SP/AgentInfo/SNMP/user/ snmpusername
AuthPassword= password
AuthProtocol= MD5|SHA
Permission= rw|ro PrivacyPassword= password
PrivacyProtocol= none|DES
Delete an SNMP user. delete /SP/AgentInfo/SNMP/user/ snmpusername
Display information
about SNMP public
(read-only)
communities. show /SP/AgentInfo/SNMP/communities/public
TABLE A-7 System Start, Stop, and Reset Commands
Description Command
Start the host system. set /SYS/CtrlInfo PowerCtrl=on
Stop the host system set /SYS/CtrlInfo PowerCtrl=off
Stop the host system
gracefully. set /SYS/CtrlInfo PowerCtrl=gracefuloff