Configuring snmp on the elom, Adding your server to your snmp environment, Configuring receipt of snmp traps – Sun Microsystems Sun Fire X4150 User Manual
Page 108: Managing snmp user accounts, Adding a user account
92
Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
Configuring SNMP on the ELOM
The ELOM has a preinstalled SNMP agent that supports trap delivery to an SNMP
management application.
To use this feature, you must integrate the platform-specific MIBs into your SNMP
environment, tell your management station about your server, then configure the
specific traps.
Adding Your Server to Your SNMP Environment
Add your Sun server as a managed node using your SNMP management
application. See your SNMP management application documentation for further
details.
Configuring Receipt of SNMP Traps
Configure a trap in your ELOM. See
, or
E-mail Notification” on page 30
.
Managing SNMP User Accounts
You can add, delete, or configure SNMP user accounts from the CLI. By default,
SNMP v3 is enabled, and SNMP v1 and v2c are disabled.
Adding a User Account
To add an SNMP v3 read-only user account, enter the following command:
create /SP/AgentInfo/SNMP/user/
username authenticationpassword=
password
To add an SNMP v1/v2c user account, enter the following command:
create /SP/AgentInfo/SNMP/communities/
communityname