Sun Microsystems Sun Fire X4150 - Manual (Page 52)

36 Sun Fire X4150 Server Embedded Lights Out Manager Administration Guide • September 2007
▼ To Delete an SNMP Community
1. In the SNMP screen, select SNMP Communities from the drop-down list, and
then click Select.
The SNMP Communities screen appears.
1. Select the radio button at the head of the row for the community that you want
to delete.
2. Click the Delete button to delete the community.
The system does not prompt for a confirmation.
▼ To Modify an SNMP Community
1. In the SNMP screen, select SNMP Communities from the drop-down list, and
then click Select.
The SNMP Communities screen appears.
2. To change permissions for an existing community, select the radio button at the
head of the row for the community you would like to modify.
3. Click Modify.
The displayed screen allows you to change file permissions for that community.
4. Select the permission from the Permission drop-down list.
The permission is either read-only (ro) or read/write (rw).
5. Click Submit to modify the community, or click Reset to clear your changes.
▼ To Add an SNMP User
1. In the SNMP screen, select SNMP User Settings from the drop-down list, and
then click Select.
The SNMP User Settings screen appears.
2. Select the radio button at the head of an unoccupied row.
3. Click Add to create a new user.
The User Setting screen appears.
4. Fill in the open fields for the new user in the User Setting screen.
The Authentication Protocol options are MD5 and SHA.
The Permission options are rw (read/write) and ro (read-only).