Sun Microsystems Sun Fire X4150 - Manual (Page 55)

Chapter 4 Configuring, Managing and Maintaining the Server Using the Web-Based Interface 39
The permissions that a user can be assigned include:
■ Administrator – Enables read and write access to all ELOM software features,
functions, and commands.
■ Operator – Enables limited access to SP software features, functions, and
commands. Operators cannot change their assigned roles.
■ User – Enables a user to access the system without being able to add, modify, or
delete accounts.
■ Callback – Enables access to commands that set up the callback feature.
Note – If the SP password has been changed and then lost, a BIOS option exists to
reset the password back to the default changeme. See “Resetting the Service
Processor” on page 44 . This method is not supported if you use a virtual CD-ROM.
▼ To Add a User
1. From the User Management submenu, click the User Account tab.
The User List screen appears.
2. Click any button labeled Add User.
The Manage User Account screen appears (see FIGURE 4-3 ).
If all 10 user account slots are configured, you must delete an existing user
account before you can add a new user account. See
“To Delete a User Account”
on page 41 .