beautypg.com

Manual configuration, Using dhcp/bootp – SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart User Manual

Page 45

background image

B

ASIC

C

ONFIGURATION

2-13

Manual Configuration

Web – Click System, IP. Specify the management interface, IP
address and default gateway, then click Apply.

CLI – Specify the management interface, IP address and default
gateway.

Using DHCP/BOOTP

If your network provides DHCP/BOOTP services, you can
configure the switch to be dynamically configured by these
services.

Web – Click System, IP. Specify the Management VLAN, set the IP
Address Mode to DHCP or BOOTP. Then click Apply to save your
changes. The switch will broadcast a request for IP configuration
settings on the next power reset. Otherwise, you can click Restart
DHCP to immediately request a new address.

Console#config
Console(config)#interface vlan 1

3-92

Console(config-if)#ip address 10.2.13.30 255.255.255.0

3-74

Console(config-if)#exit
Console(config)#ip default-gateway 192.168.1.254

3-76

Console(config)#

b_mgmt.book Page 13 Tuesday, July 8, 2003 5:24 PM