SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 298)

C
OMMAND
L
INE
I
NTERFACE
3-130
VLAN Commands
A VLAN is a group of ports that can be located anywhere in the
network, but communicate as though they belong to the same
physical segment. This section describes commands used to create
VLAN groups, add port members, specify how VLAN tagging is
used, and enable automatic VLAN registration for the selected
interface.
Command Function Mode Page
Edit VLAN Groups
vlan database Enters VLAN database mode to add,
change, and delete VLANs GC 3-131
vlan Configures a VLAN, including VID,
name and state VC 3-132
Configure VLAN Interfaces
interface vlan Enters interface configuration mode
for specified VLAN IC 3-133
switchport mode Configures VLAN membership
mode for an interface IC 3-134
switchport
acceptable-frame-
types Configures frame types to be
accepted by an interface IC 3-135
switchport
ingress-filtering Enables ingress filtering on an
interface IC 3-136
switchport native
vlan Configures the PVID (native VLAN)
of an interface IC 3-137
switchport allowed
vlan Configures the VLANs associated
with an interface IC 3-138
switchport gvrp Enables GVRP for an interface IC 3-142
switchport forbidden
vlan Configures forbidden VLANs for an
interface IC 3-139
b_mgmt.book Page 130 Tuesday, July 8, 2003 5:24 PM