SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 186)

C
OMMAND
L
INE
I
NTERFACE
3-18
reload
Use this command to restart the system.
Note: When the system is restarted, it will always run the
Power-On Self-Test. It will also retain all configuration
information stored in nonvolatile memory by the copy
running-config startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command resets the entire system.
Example
This example shows how to reset the switch:
end
Use this command to return to Privileged Exec mode.
Default Setting
None
Command Mode
Global Configuration, Interface Configuration, Line
Configuration, VLAN Database Configuration
Console#reload
System will be restarted, continue ? y
b_mgmt.book Page 18 Tuesday, July 8, 2003 5:24 PM