beautypg.com

SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart User Manual

Page 247

background image

IP C

OMMANDS

3-79

Command Mode

Normal Exec, Privileged Exec

Command Usage

• Use the ping command to see if another site on the network can

be reached.

• Following are some results of the ping command:

- Normal response -The normal response occurs in one to ten

seconds, depending on network traffic.

- Destination does not respond - If the host does not respond,

a “timeout” appears in ten seconds.

- Destination unreachable - The gateway for this destination

indicates that the destination is unreachable.

- Network or host unreachable - The gateway found no

corresponding entry in the route table.

• Press to stop pinging.

Example

Related Commands

interface (3-92)

Console#ping 10.1.0.9
Type ESC to abort.
PING to 10.1.0.9, by 5 32-byte payload ICMP packets, timeout is 5
seconds
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 10 ms
response time: 0 ms
Ping statistics for 10.1.0.9:
5 packets transmitted, 5 packets received (100%), 0 packets lost (0%)
Approximate round trip times:
Minimum = 0 ms, Maximum = 10 ms, Average = 8 ms
Console#

b_mgmt.book Page 79 Tuesday, July 8, 2003 5:24 PM