SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 310)

C
OMMAND
L
INE
I
NTERFACE
3-142
switchport gvrp
Use this command to enable GVRP for a port. Use the no form to
disable it.
Syntax
switchport gvrp
no switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
show garp timer Shows the GARP timer for the
selected function NE,
PE 3-145
Global Commands
bridge-ext gvrp Enables GVRP globally for the
switch GC 3-146
show bridge-ext Shows bridge extension
configuration PE 3-147
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
Command Function Mode Page
b_mgmt.book Page 142 Tuesday, July 8, 2003 5:24 PM