SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 309)

GVRP
AND
B
RIDGE
E
XTENSION
C
OMMANDS
3-141
Default Setting
Shows all VLANs.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows how to display information for
VLAN 1:
GVRP and Bridge Extension Commands
GARP VLAN Registration Protocol defines a way for switches to
exchange VLAN information in order to automatically register
VLAN members on interfaces across the network. This section
describes how to enable GVRP for individual interfaces and
globally for the switch, as well as how to display default
configuration settings for the Bridge Extension MIB.
Console#show vlan id 1
VLAN Type Name Status Ports/Channel groups
---- ------- ---------------- --------- ---------------------------------------
1 Static DefaultVlan Active Eth1/ 1 Eth1/ 2 Eth1/ 3 Eth1/ 4 Eth1/ 5
Eth1/ 6 Eth1/ 7 Eth1/ 8 Eth1/ 9 Eth1/10
Eth1/11 Eth1/12
Console#
Command Function Mode Page
Interface Commands
switchport gvrp Enables GVRP for an interface IC 3-142
switchport forbidden
vlan Configures forbidden VLANs for
an interface IC 3-139
show gvrp configuration Displays GVRP configuration for
selected interface
NE,
PE 3-143
garp timer Sets the GARP timer for the
selected function IC 3-144
b_mgmt.book Page 141 Tuesday, July 8, 2003 5:24 PM