SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 187)

G
ENERAL
C
OMMANDS
3-19
Example
This example shows how to return to the Privileged Exec mode
from the Interface Configuration mode:
exit
Use this command to return to the previous configuration mode or
exit the configuration program.
Default Setting
None
Command Mode
Any
Example
This example shows how to return to the Privileged Exec mode
from the Global Configuration mode, and then quit the CLI
session:
quit
Use this command to exit the configuration program.
Default Setting
None
Console(config-if)#end
Console#
Console(config)#exit
Console#exit
Press ENTER to start session
User Access Verification
Username:
b_mgmt.book Page 19 Tuesday, July 8, 2003 5:24 PM