SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 211)

S
YSTEM
M
ANAGEMENT
C
OMMANDS
3-43
* There are only Level 2, 5 and 6 error messages for the current firmware release.
Default Setting
Flash: errors (level 3 - 0)
RAM: warnings (level 7 - 0)
Command Mode
Global Configuration
Command Usage
The message level specified for Flash memory must be a higher
priority (i.e., numerically lower) than that specified for RAM.
Example
errors 3 Error conditions
(e.g., invalid input,
default used) LOG_ERR
warnings 4 Warning conditions
(e.g., return false,
unexpected return) LOG_WARNING
notifications 5 Normal but
significant
condition, such as
cold start LOG_NOTICE
informational 6 Informational
messages only LOG_INFO
debugging 7 Debugging
messages LOG_DEBUG
Console(config)#logging history ram 0
Console(config)#
Level Argument Level Description Syslog Definition
b_mgmt.book Page 43 Tuesday, July 8, 2003 5:24 PM