SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 191)

F
LASH
/F
ILE
C
OMMANDS
3-23
The following example shows how to copy the running
configuration to a startup file.
The following example shows how to download a configuration
file:
This example shows how to copy a secure-site certificate from an
TFTP server. It then reboots the switch to activate the certificate:
delete
Use this command to delete a file or image.
Syntax
delete filename
filename - Name of the configuration file or image name.
Default Setting
None
Console#copy running-config file
destination file name : startup
/
Console#
Console#copy tftp startup-config
TFTP server ip address: 10.1.0.99
Source configuration file name: startup.01
Startup configuration file name [startup]:
/
Console#
Console#copy tftp https-certificate
TFTP server ip address: 10.1.0.19
Source certificate file name: SS-certificate
Source private file name: SS-private
Private password: ********
Success.
Console#reload
System will be restarted, continue ? y
b_mgmt.book Page 23 Tuesday, July 8, 2003 5:24 PM