SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 261)

I
NTERFACE
C
OMMANDS
3-93
Default Setting
None
Command Mode
Global Configuration
Example
To specify the Ethernet port, enter the following command:
description
Use this command to add a description to an interface. Use the no
form to remove the description.
Syntax
description string
no description
string - Comment or a description to help you remember
what is attached to this interface. (Range: 1-64 characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to Ethernet port 15.
Console(config)#interface ethernet 1/25
Console(config-if)#
Console(config)#interface ethernet 1/15
Console(config-if)#description RD-SW#3
Console(config-if)#
b_mgmt.book Page 93 Tuesday, July 8, 2003 5:24 PM