SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 314)

C
OMMAND
L
INE
I
NTERFACE
3-146
Example
Related Commands
garp timer (3-144)
bridge-ext gvrp
Use this command to enable GVRP. Use the no form to disable it.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN
information in order to register VLAN members on ports across
the network. This function should be enabled to permit
automatic VLAN registration, and to support VLANs which
extend beyond the local switch.
Example
Console#show garp timer ethernet 1/1
Eth 1/ 1 GARP timer status:
Join timer: 20 centiseconds
Leave timer: 60 centiseconds
Leaveall timer: 1000 centiseconds
Console#
Console(config)#bridge-ext gvrp
Console(config)#
b_mgmt.book Page 146 Tuesday, July 8, 2003 5:24 PM