SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 185)

G
ENERAL
C
OMMANDS
3-17
show history
Use this command to show the contents of the command history
buffer.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size is fixed at 20 commands.
Example
In this example, the show history command lists the contents of
the command history buffer:
The ! command repeats commands from the Execution command
history buffer when you are in Normal Exec or Privileged Exec
Mode, and commands from the Configuration command history
buffer when you are in any of the configuration modes. In this
example, the !2 command repeats the second command in the
Execution history buffer (config).
Console#show history
Execution command history:
2 config
1 show history
Configuration command history:
4 interface vlan 1
3 exit
2 interface vlan 1
1 end
Console#
Console#!2
Console#config
Console(config)#
b_mgmt.book Page 17 Tuesday, July 8, 2003 5:24 PM