SMC Networks SMC EZ 10/100/1000 SMCGS8P-Smart - Manual (Page 277)

A
DDRESS
T
ABLE
C
OMMANDS
3-109
Command Mode
Global Configuration
Command Usage
The static address for a host device can be assigned to a
specific port within a specific VLAN. Use this command to add
static addresses to the MAC Address Table. Static addresses
have the following characteristics:
• Static addresses will not be removed from the address table
when a given interface link is down.
• Static addresses are bound to the assigned interface and will not
be moved. When a static address is seen on another interface,
the address will be ignored and will not be written to the
address table.
• A static address cannot be learned on another port until the
address is removed with the no form of this command.
Example
show mac-address-table
Use this command to view classes of entries in the
bridge-forwarding database.
Syntax
show mac-address-table [address mac-address [mask]]
[interface interface] [vlan vlan-id] [sort {address | vlan |
interface}]
• mac-address - MAC address.
• mask - Bits to match in the address.
Console(config)#mac-address-table static 00-e0-29-94-34-de interface ethernet
1/1 vlan 1 delete-on-reset
Console(config)#
b_mgmt.book Page 109 Tuesday, July 8, 2003 5:24 PM